King Volkswagen

SALES HOURS:
9:00AM - 8:00PM

SERVICE HOURS:
7:00AM - 6:30PM

PARTS HOURS:
7:00AM - 6:00PM

Blog / Safety

Stay Safe In A Work Zone

 

When you’re driving, one inevitability no matter where you’re going is construction. Whether it’s just a stray traffic cone or a full-blown work zone, you need to stay safe. Check out our failproof tips for driving safely and obeying the law in a construction area!

First, expect the unexpected. Never assume that everyone is going to follow the rules or drive safely. This is why YOU should follow the rules and drive as safely as you have ever driven in your entire life.

Always pay attention. Not only will it help you to drive more safely if you do, but it’ll also help you notice signs, flaggers, and more. Pay attention specifically to the signs, because they’ll tell you speed limits and upcoming work areas. Flaggers are just as important as signs, though - if you ignore a flagger, you could face the same ticket that you’d get for ignoring a sign.

Merge as soon as you can instead of waiting until the last minute. Not only is waiting rude, especially if you use the closing lane to speed past others, but it can hold up traffic and you risk getting into an accident.

If you see that the speed limit is being reduced, slow down immediately. If you’re going 60mph, you’re moving about 88 feet per second. If you see a sign that says there’s a work zone in 1,500 feet, you’ll get to that work zone in about 17 seconds. So, go slow!

Tailgating is always a no-no. Does this even need to be said? Stay far away from the person in front of you. Space is safe!

Always stay in the center of your lane. This is part of paying attention - when you are focused, you won’t swerve in and out of your lane. If you can’t stay in your lane, you’re likely to hit cones, barriers, and even workers.

 

The work zone is not over until you see a sign that says it is. Even if there’s no work happening, you’re still subject to speed limits and fines until you see the sign that says the work zone has ended.

Posted in:

Related Posts

BLOG_HEADER_4

Our Tips To Avoid Blind Spots | Gaithersburg, MD

Blind spots are dangerous for pedestrians, cyclists, and other road users because these area of the road are outside the driver’s field of vision. Although many new vehicles have safety features such as Blind Spot Monitor that help alert drivers that someone or something is in your blind spot. However, this helpful feature is not in every trim level of your favorite vehicle. Also if you have an older vehicle you will probably not have the helpful safety feature. But it is important to make sure that even without this technology we are taking the right precautions to prevent blind spot accidents. In this week’s blog, we wanted to help out any driver that might struggle with blinds spots and doesn’t have this technology. Even if your vehicle has this technology it is important to always check yourself, so we suggest taking a look at the tips below the top. For more information on how to approach pedestrians, cyclists, and motorcyclists in your blind spot check out these helpful tips and be sure to extra cautious around them. King Volkswagen's Tips To Avoid Blind Spots: Pedestrians and Blind Spots: Avoid being in a vehicle's blind spot, especially trucks and buses. Make eye contact with the driver. Otherwise, assume the driver cannot see you. Be alert at intersections, even when you have the right of way, e.g. on a green light or pedestrian crossing signal. Pay attention to the turn signal lights used by vehicles at intersections. Do not cross behind a vehicle as it could back up without noticing you. Be visible: wear bright clothing, reflective strips, etc. If you are trying to make your presence known, keep in mind that the driver cannot hear you. Walk on the sidewalk, or, if there isn’t one, on the side of the road, facing traffic. Cyclists and Blind Spot Avoid being in a vehicle's blind spot, especially trucks and buses. Make eye contact with the driver. Otherwise, assume the driver cannot see you. Pay attention to the turn signal lights used by vehicles at intersections. Be visible: wear bright clothing, reflective strips, etc. Never pass on the right near an intersection. Motorists, Motorcyclist and Blind Spots: Avoid being in a large vehicle's blind spot Do not cut off a heavy vehicle Never pass a heavy vehicle on the right at an intersection Keep a safe distance between your vehicle and the heavy vehicle in front of you Pay attention to the turn signal lights used by vehicles at intersections.

BLOG_HEADER_2

Car Seat Do’s Just For You! | Gaithersburg, MD

It’s no question that all parents understand the importance of a car seat. But as car seats become more and more advanced the harder they are to understand, which leads to improper installations and other potentially harmful mistakes. This week we want to make sure that your little bundles of joys are safely secured in their seats to help give you the peace of mind you need to get from point A to point B! So this week are focusing on the DOs when dealing with a car seat. So take a look at our tips below and if you have any questions we will do our best to help answer them. And when installing or turning your child to front-facing, be sure to check out your seat’s instructions and your vehicle’s owners manual to see what they suggest. King Volkswagen's Car Seat Do’s: Make sure the harness-retainer clip is level with your child’s armpits. If they are in the wrong place, the straps could end up sliding off. Take your car-seat to a local inspection site so a professional can ensure the installation is correct. Choose a car-seat with a five-point harness. If you have a forward-facing seat, place the harness straps on your child’s shoulders to ensure the most protection in the event of a collision. If your child has outgrown a car-seat, try using a high-back booster seat. Studies have shown these are safer than backless ones in the event of side-impact collisions. Tighten the harness straps so they are tight enough for you to only fit one finger underneath. Safety-belts should be tightened enough so the seat is only able to wiggle less than one inch from side to side.

BLOG_HEADER_2

King Volkswagen’s Car Seat Checklist | Gaithersburg, MD

If you regularly drive with a child in the car, you understand the importance of a car seat and most likely the basics of how to install it. But, as car seats become more and more advanced, it may become trickier to set them up, which leads to improper installations and other potentially harmful mistakes. This week we want to make sure that your little bundles of joys are safely secured in their seats to help give you the peace of mind you need to get from point A to point B! So, below we’ve compiled a checklist of steps to take to make sure your car seat is safe and properly installed! King Volkswagen’s Car Seat Checklist: Make sure the harness-retainer clip is level with your child’s armpits. If they are in the wrong place, the straps could end up sliding off. Take your car-seat to a local inspection site so a professional can ensure the installation is correct. Choose a car-seat with a five-point harness. If you have a forward-facing seat, place the harness straps on your child’s shoulders to ensure the most protection in the event of a collision. If your child has outgrown a car-seat, try using a high-back booster seat. Studies have shown these are safer than backless ones in the event of side-impact collisions. Tighten the harness straps so they are tight enough for you to only fit one finger underneath. Safety belts should be tightened enough so the seat is only able to wiggle less than one inch from side to side